| Date of Review |
January 2006 |
| Manufacturer |
Academy |
| Subject |
F-14A Tomcat |
| Scale |
1/48 |
| Kit Number |
1659 |
| Primary Media |
Styrene |
| Detail Media |
Styrene |
| Clear Media |
Styrene |
| Pros |
One of the nicest F-14 kits in 1/48 scale |
| Cons |
Textured 'shadow' on
the underside of the fuselage to show where TARPS goes |
| Skill Level |
Basic |
| MSRP (USD) |
$30.00 |
Background
Back in the early 1960s, then-US Secretary of Defense (SecDef)
Robert McNamara had a vision to bring the different armed services
together to save some money by combining requirements. For example,
the Air Force and Navy had slightly different requirements for
the AIM-9 Sidewinder resulting in different versions for each service
at a higher price tag. In the case of the missiles, the services
finally banded together and are buying the same missiles allowing
for purchases at a greater quantity discount. The concept was definitely
sound.
McNamara was looking hard at his shrinking defense budget and
in 1963, forced the services to use a common nomenclature system
for its aircraft so that aircraft like the Air Force's new F-110A
was really an F-4C. About this same time, the Air Force was looking
for a new nuclear-capable precision strike aircraft while the Navy
was looking for a fleet interceptor. The SecDef chose this unfortunate
combination of requirements to force the two services into a common
airframe. The F-111 was born. While the Air Force version would
go on to meet that service's expectations, the Navy's F-111B just
wasn't going to cut it for carrier operations. McNamara reluctantly
agreed.
What the F-111B had going for it was a crew of two, a pair of
good engines with the TF30 afterburning turbofans, the AWG-9 advanced
fire control system, and the long-range AIM-54 Phoenix missile.
What it needed was a lighter, more agile airframe! Grumman developed
the answer by wrapping all of the best features of the F-111B into
the F-14 Tomcat. A legend was born.
Like the F-111B, the F-14A uses variable geometry wings to allow
for maximum lift during launch and recovery from the deck while
still achieving Mach 2+ intercepts in defense of the fleet. Unlike
the F-111B, the Tomcat was agile in a dogfight, though its TF30
engines were just not powerful enough to sustain high-performance
maneuvers for very long. This was later fixed with the replacement
of the TF30 with the F110 engines on the F-14B/D.
The only country to operate the F-14 outside of the USN is Iran.
While US operations of the F-14 never accumulated the combat records
of the F-15, the Iranians used the Tomcat to its fullest
extent and not only fired the Phoenix in anger (which the US has
not done), but when they ran out of AIM-54s, they began carrying
HAWK missiles instead!
The Kit
Many folks have been dazzled
by the Hasegawa 1/48 Tomcat series, and rightfully so as those
kits offer some impressive details. However, at an MSRP that ranges
from $43 to over $60 USD, is that the best option for every project?
No!
The problem is that the aftermarket community continues to have
a love affair with the F-14. As a hardcore F-14 lover myself, it
pains me not to be able to model all of the magnificent color schemes
that are available. But the thought of building the very detailed
Hasegawa kit for many of these schemes is far too much work! Even
the most AMS modeler will want one or two Tomcats with the flaps
and slats hanging out, but the rest would be parked with their
wings swept as not to occupy too much shelf space. So if you're
not going to hang everything out, do you want to spend that much
for a Hasegawa Tomcat? I think not.
The Academy F-14A came out about the same time as the first Hasegawa
Tomcats and its scribed detailing is every bit as nice. Assembly
of the kit is more like building the Revell-Monogram F-14 - a no-brainer.
This is an ideal combination if you're looking to build up your
collection of fleet colors without having to deal with all of the
engineering required for the Hasegawa kit.
The kit is molded in light gray styrene and presented on six parts
trees, plus separate upper and lower fuselage halves, and a small
clear tree containing the windscreen and canopy. As I mentioned
earlier, the surface detailing is all finely scribed.
The cockpit is nicely detailed and, like the Hasegawa kit, can
be displayed empty or with a pair of nice crew figures seated in
the 'pit'. Unlike the Hasegawa kit, the Academy F-14A can be posed
with the radome open revealing the radar underneath.
The wings of the Academy kit are designed like the Revell-Monogram
kit with a sweep mechanism that will allow the wings to be moved
after completion. If you want to display the aircraft in the take-off
or landing configuration with the flaps and slats all out, then
you really want the Hasegawa kit. If you are going to simply park
the aircraft with the wings swept, the Hasegawa kit is major overkill
and this kit is what you're looking for.
Academy engineered the gun area of the nose as a separate part,
but to date have not done anything with this innovation. Out of
the box, this F-14A has the early styled gun gas vents, but the
fleet was updated with the later-styled vents that were fielded
with the F-14B and F-14D. It would be nice if Academy (or someone)
would offer an updated panel here.
The Academy kit, like the Hasegawa, feature engine faces visible
down the intake trunks, though the afterburner chambers are a bit
shallow on the Academy kit. There are several replacement sets
for the TF30 nozzles and A/B chambers out there including a nice
set from Aires. The kit does provide a pair of open or closed nozzles
allowing you to pose your aircraft in a variety of conditions.
Unlike the Hasegawa kit, the Academy Tomcat comes with a nice
set of external stores including:
- 2 x AIM-9
- 4 x AIM-7
- 6 x AIM-54
- 1 x TARPS
- 2 x External Fuel Tanks
Markings are included for one example:
- F-14A, 159434, VF-143, AE/100, USS America CAG aircraft
Conclusion
I recently picked up a couple of these kits as I wanted to do
some of the colorful cats without going through the pains of building
the super-detailed Hasegawa kit for all of them.
I don't know if
you remember, but the early Hasegawa 1/48 Tomcats had an engineering
flaw in the lower intake trunk parts that meant that there was
no way the kit would fit together without some work. I wound up
tossing one of these expensive cats into the trash after discovering
the flaw for myself. Hasegawa has since fixed their molds, but
there are still some of these flawed cats floating around the hobby
swap meets and eBay.
Don't get me wrong, the Hasegawa kit is still king when it comes
to the super-detailed Tomcat and is the only contemporary option
for an F-14B or F-14D unless you want to work with the older Revell-Monogram
raised panel lines. But in my book, for the F-14A, the Academy
kit is sill my top pick for modeling a parked aircraft. The Academy
F-14A is a quick and painless build at a fraction of the price.
And at the price, I find it easier to drop a Black Box or Aires
resin cockpit into the model than the more expensive Hasegawa kit.
Now if we can only convince Academy to add some tooling to render
an F-14B and F-14D from this kit!
References
Return to the Aircraft Review Menu
|