| Date of Review |
June 2005 |
| Manufacturer |
Academy |
| Subject |
Polikarpov I-16 Type 18 |
| Scale |
1/48 |
| Kit Number |
2170 |
| Primary Media |
Styrene |
| Detail Media |
Styrene |
| Clear Media |
Styrene |
| Pros |
Easy build |
| Cons |
|
| Skill Level |
Basic |
| MSRP (USD) |
$22.00 |
Background
Polikarpov's design signature during the mid and late 1930s
was stubby, barrel-shaped fighters. The primary machine during
that era was the I-15 biplane. Like their barrel-shaped brothers
on the other side of the world, the Grumman F3Fs, the I-15
was going to be transformed almost directly into a monoplane
fighter, the I-16. In the transformation, the I-15's upper
wing was deleted and the lower wing strengthened to carry the
full load. With a wingspan one meter shorter than the I-15,
the early I-16 was powered by the same 700hp M-25 radial engine
as the late-model I-15. The I-16 also incorporated retractable
landing gear. Armament for the early I-16 was a pair of 7.62mm
machine guns
The I-16 saw combat on two fronts in the late 1930s, first
in the Spanish Civil War and later with the Chinese against
Japan. In Spain, the early Bf 109s flown by the Nationalists
were surprised by the agile I-16 and suffered losses to the
'Rata' (Rat) as they nicknamed it. The Japanese forces were
also surprised by the agile I-16 until they finally discovered
and exploited the I-16's weaknesses.
By the time the Nazi violated the peace treaty between the
Soviet Union and Germany, the I-16 was obsolete. Nonetheless,
the I-16 soldiered on into 1943 before being completely phased
out of service. One of the most famous tactics flown by Soviet
pilots in 1941 was ramming their I-16s into the tails of German
aircraft, then either limping back to base or parachuting to
safety.
The Kit
Academy has released the I-16 Type 18 in 1/48 scale. While
nearly identical to the Hobbycraft kit, the Academy offering
has all of the parts for the various versions of the I-16 included
in one box, including the winter skis, updated cowl faces,
rocket rails and a tailwheel. Though some of these parts were
only used on other types of the I-16, you have the flexibility
to build any version of the Rata you'd like.
The kit is a simple build, with the parts molded onto three
trees of light gray styrene. One small clear windscreen is
also provided. Detailing is scribed and nicely done. Many of
the parts are optional, making the painting of this aircraft
more complex than assembly.
There are no fit problems with this kit, and though the cockpit
detailing is a little sparse, it is difficult to see into the
cockpit once the kit is assembled. One solution is to cut out
the entry door on the left side of the cockpit and pose it
open. That will make any detailing you chose to perform in
the cockpit much easier to see.
Markings
Markings are provided for two aircraft:
- I-16, 72nd Aviation Regiment, Soviet Air Force, Murmansk,
1941, as flown by S.G. Surzhenko ("For the USSR" on
the left side of the fuselage, "For the VKP(B)" on
the right)
- I-16, 72nd Aviation Regiment, Soviet Air Force, Murmansk,
1941, as flown by Boris Safonov ("For Stalin" on
the left side of the fuselage, "Kill Facists" on
the right)
Conclusion
This is a fun kit and a definite eye-catcher for your scale
flight line. I recommend this kit to modelers of all skill
levels.
You can see a build-up review of the Academy
I-16 here.
My sincere thanks to MRC for
this review sample!
Return to the Aircraft Review Menu
|