Classic Airframes 1/48 Venom FB.1 Kit First Look
|Date of Review||March 2007||Manufacturer||Classic Airframes|
|Subject||de Havilland Venom FB.1||Scale||1/48|
|Kit Number||4109||Primary Media||Styrene, Resin|
|Pros||Nice detailing, especially with the resin castings||Cons|
|Skill Level||Intermediate||MSRP (USD)||Out of Production|
When the UK Air Ministry developed a requirement for a replacement fighter-bomber to the de Havilland Vampire series, what better choice (at the time) than an evolutionary development of the Vampire - the de Havilland Venom. This new type was designed to exploit advancements in turbine engine technology which was embodied in the de Havilland Ghost engine.
Where the Vampire was severely limited by its early de Havilland Goblin engine rated at a mere 1,400 pounds of thrust, the Ghost produced over three times more thrust (4,800 pounds) which could be translated into an airframe that could achieve greater performance. Indeed, the Venom's Ghost engine allowed the aircraft to carry the same payload to roughly the same combat radius, but do so at nearly 100 knots faster and with a far more impressive rate of climb.
The Venom saw combat in service with the RAF and RNZAF during the Malayan emergency between 1948-1960 well as during the Suez War in 1956. The RAF retired Venoms from front-line service in the early 1960s though they remained in service through 1983 in the Swiss Air Force.
Classic Airframes continues to tell the de Havilland jet fighter story that started with the Vampire and expands now into the Venom series. As with the Vampire, this kit is molded in medium gray styrene and presented on three parts trees. The canopy and windscreen are also injection molded styrene. And just like the Vampire kits, this release also features an impressive set of resin castings to really set off the details in this kit.
The cockpit naturally starts off this project and the tub is a combination of the resin floorboard/rear bulkhead part and the two resin curved sidewalls. The instrument panel, rudder pedals, control stick, and Martin Baker Mk.2 ejection seat round out the interior.
The completed interior is trapped inside the fuselage halves along with the engine exhaust duct. The resin intake inserts are installed in the wing roots and the assembled wings are fitted to the fuselage. Next come the tail booms and the horizontal stabilizer to round out the basic airframe.
Once you add the landing gear, external stores, and the clear parts, you've got yourself a Venom. External store options are a pair of external fuel tanks and four rockets.
Decals are provided for three examples:
- Venom FB.1, WE470, 14 Sqn, RNZAF, RAF Tengah, Singapore, 1956
- Venom FB.1, WK413, 14 Sqn, RAF Fassberg, West Germany, 1953
- Venom FB.1, J1641, Flieger Staffel 10, Swiss AF, 1966
This is another typically nice release from Classic Airframes. Until this kit arrived on the scene, your choices for the Venom were limited to the Aeroclub and the Glencoe versions of this aircraft in 1/48 scale. Classic Airframes has easily raised the bar on this subject!
My sincere thanks to Classic Airframes for this review sample!