By your command...


Facebook Facebook
Google+ Google+
Twitter Twitter
Flickr Flickr
YouTube YouTube

Notice: The appearance of U.S. Air Force, U.S. Army, U.S. Navy, U.S. Marine Corps, U.S. Coast Guard, Department of Defense, or NASA imagery or art does not constitute an endorsement nor is Cybermodeler Online affiliated with these organizations.

Sd.Kfz.250/10 Neu w/3.7 cm Pak

DML 1/35 Sd.Kfz.250/10 Neu w/3.7 cm Pak - Smart Kit First Look

By Cookie Sewell

Date of Review November 2009 Manufacturer DML
Subject Sd.Kfz.250/10 Neu w/3.7 cm Pak - Smart Kit Scale 1/35
Kit Number 6595 Primary Media 543 parts (346 in grey styrene, 168 “Magic Track” two-piece links, 19 etched brass, 8 clear styrene, 2 turned brass)
Pros Updates an older but still decent kit; lots of spare parts Cons Could have probably benefitted from DS plastic one-piece track runs
Skill Level Experienced MSRP (USD) $41-46

First Look

The latest from DML affiliate takes the“Premium Edition” Sd.Kfz. 250 Neu kit and adds parts to create the Sd.Kfz. 25/10 mit 3.7 cm Pak 36. Basically this kit combines the proven sprues from the 250 series kits with the 3.7 cm sprue from the 251/10 platoon leader’s kit (6139) and a set of generic German tool, kit and weapons sprues with a handful of new parts (5).

As before this kit retains all of the upgrades from its immediate predecessor to include the one-piece slide molded lower hull and the engine, albeit with a new engine block. The suspension arms have been redone and also the drive sprocket mounts.

Once again the kit does not use DS plastic for tracks. Again, this kit uses the “Magic Track” precut links with a separate pad for each link to “trap” the pins of the next link. This is very tedious work as the tracks are about the same size as the average 1/72 scale model; again, for a “Smart Kit” and DML should consider DS Plastic molding techniques to make single-section track runs.

As with the “Stroke 1", the tracks do mount on better detailed three-piece drivers, and the front wheels are now “sandwich” moldings to create both proper tread pattern and tread depth (five parts per tire.)

This kit adds three new parts for the 3.7 ammo rack as well as two sets of generic German weapons for the racks inside the hull. The external stowage bins still have separate access panels, so all four can be displayed in the open position. The kit now again includes the Sd.Kfz. 251 clear styrene viewers, which can also be shown either open or closed.

Most of the etched brass provides the straps and mounts for this kit inside the lower hull of the model. The directions are pretty sketchy; while they do cover the placement and use of these items, you must pay close attention when working on the interior.

Technical assistance and work on this kit was provided by Hirohisa Takada, Minoru Igarashi, Dan Graves, Tom Cockle, and Gary Edmundson.

The model comes with but one finishing option: Unidentified Unit, Western Front, 1944 (tricolor with black 222). A “number jungle” for the license plates and a tiny sheet for the hull.

Overall this is a better choice than some kits and should prove popular with the fans of the “little” halftrack.

Thanks to Freddie Leung of Dragon Models USA for the review sample.

Sprue Layout:

  • A 41 250 chassis and details
  • C 31 250 Neu upper hull and interior components
  • E 37 250 Neu lower hull and details
  • E 3 3.7 cm ammo rack and magazines
  • F 168 “Magic Track” two-piece links
  • G 28x2 250 road wheels and front wheels
  • H 6 250 drivers
  • W 8 251 clear styrene
  • X 16 250 engine
  • Y 1 250 one piece lower hull
  • Y 2 Engine block
  • GA 64 German equipment A (helmets, canteens, mess kits, gas masks)
  • TG 10 German tools - pioneer tools and fire extinguishers
  • WB 18x2 German weapons - MP-44, 2 x MP-40, Gewehr 43
  • MA 19 etched brass
  • MB 2 turned brass width indicators
  • 6139 43 3.7 cm PaK 36 and conversion parts