Minicraft 1/144
C-130A Hercules

Background

The Lockheed C-130 arose out of a requirement for a more capable airlifter after combat experience in Korea revealed serious airlift shortcomings with the existing World War Two vintage transports. In 1954, Lockheed first flew the YC-130 and in the decades that followed, more than 2000 examples have been built.

The C-130 is such a versatile airframe, it was adapted into a variety of special missions from gunship (AC-130), drone mothership (DC-130), electronic warfare (EC-130), airborne command post (also EC-130), tanker (HC-130), ski-equipped arctic airlifter (LC-130), special missions (MC-130), and hurricane hunter (WC-130). In 2006, the aircraft marked its 50th anniversary in military service and it is clear that it has another decade or two of service (at least) left in her.

The C-130 is also the principal airlifter for 66 other countries as well as equipping a number of commercial operators as the L-100. The current production version of the venerable C-130 is the J-model featuring six-bladed propellers turned by Rolls Royce engines. This is a bit of a departure since the primary power for the C-130 prior to the J-model was the Allison T56A.

The Kit

Minicraft has produced the first styrene kits of the C-130 in 1/144 scale in a number of decades. Revell had the first kit in this scale, but that kit is a collector's item and was simplistic at best. Hasegawa produced the Herc in 1/200, Airfix and Italeri in 1/72, and Italeri again in 1/48. So how much detail is lost in this scale? Not much from what you can see in these photos!

The kit is molded in white styrene and presented on seven parts trees, plus a single tree of clear parts. The kit was designed to be able to replicate quite a few of the Hercules family, which is all-the-more reason to keep it in 1/144, as a die-hard Herc nut wouldn't have room for many variants in the larger scales.

Detailing is scribed and will look nice after painting. Fit will be critical in this particular kit since this is a bare metal scheme and we all know how bare metal finishes telegraph any flaws. In experienced hands, this will look great in the provided early airlifter scheme.

So what features are in here anyway?

1. External tanks for the A-model or the later E/H models
2. Pre-drilled holes under the wings for the tanks of your choice, though you'll need to fill the holes you don't use
3. Early A-model three-bladed propellers as well as the later four-bladed propellers that were refitted to many A-models as well as all subsequent Hercs (short of the J-model)
4. Roman nose!
5. Positionable ramp and door
6. Nicely detailed landing gear

There is no interior in the cockpit, so you may want to scratch-build the crew seats for the pilots and flight engineer, as that will be about all you'll see through those tiny windows.

If you do leave the ramp and door open, you'll need to add hydraulic actuators for the ramp, open the accessway through the forward bulkhead (station 245), and add a few details in the interior. A main cargo deck is provided.

Markings

Markings are provided for two examples. The first is the impressive markings that use up most of that decal sheet - a C-130A w/radome of the 463rd Troop Carrier Wing out of Ardmore AFB, OK in 1957. The second is a camouflaged A-model with a Roman nose of the Missouri ANG used in the late 1970s.

Conclusion

This is a very impressive kit in 1/144 scale and it looks quite nice indeed. With all of the different color schemes and special mission configurations, one could easily buy several cases of these kits and still not run out of subjects. With the nice detail in this box, you won't lack for some beautiful models on your shelf!

Definitely recommended!

My sincere thanks to Minicraft for this review sample!