| Date of Review |
May 2007 |
| Manufacturer |
Monogram |
| Subject |
TBD-1 Devastator |
| Scale |
1/48 |
| Kit Number |
7575 |
| Primary Media |
Styrene |
| Detail Media |
Styrene |
| Clear Media |
Styrene |
| Pros |
Nicest TBD in 1/48 scale |
| Cons |
Only TBD in 1/48 scale |
| Skill Level |
Basic |
| MSRP (USD) |
OOP |
Background
When Douglas introduced the Devastator into the US Navy's
carrier air groups in 1937, they had created the blueprint
for future naval aviation. The aircraft was the first monoplane
to go to sea. With the exception of the flight control surfaces,
the aircraft was all-metal in construction. Most importantly,
the wings could be folded to facilitate dense parking on the
limited real estate of the flight deck or in the hangar deck.
By the time war erupted a few years later, the TBD-1 was
on the other end of the technology spectrum - virtually obsolete.
As Secretary of Defense Donald Rumsfeld once said: "You
don't go to war with the forces you want, you go with the forces
you have." Such was the case with the TBD-1, and its crews
fought hard. In the Battle of Coral Sea, TBD-1s helped to sink
the carrier Shoho, but in the Battle of Midway, the Devastators
experienced devastating losses and were soon replaced with
the TBF Avenger.
The Kit
This re-release of the Monogram TBD-1 is from the Classic Series
reissue several years ago and sported the same box art on one of
their short-term fold-to-open boxes. This kit is a sleeper as it
used to be available on a regular basis before Revell-Monogram
adopted the short-run release technique used by other model manufacturers.
Now when the kit gets re-released, it gets a little more attention,
but it hasn't be out of production long enough to become hard to
find nor gain significant value on the collector's market. At the
time of this writing, there are quite a few available on eBay at
under $10.00 USD.
This kit is molded in light gray styrene and presented on four
parts trees, plus a single tree of clear parts. The kit features
raised details, but given that the aircraft's wings were corrugated,
this seems a natural for this subject.
As with many of the kits from this generation of Monogram designs,
this kit is FULL of details. The cockpit is absolutely gorgeous
out of the box, with only seat belts needed to really set things
right. Adding any other photo-etched details in here would be nice,
but not necessary.
The kit provides a number of options for your TBD:
- Positionable landing gear
- Positionable flaps
- Folding wings
- Choice of bomb load or centerline torpedo
- Positionable forward fuselage step for access to engine crank
start port
- Starting crank
- Three-piece closed canopies or multi-piece open canopies
While the kit is a bit dated by today's Tamiyagawa standards,
in the right hands, this model is still a show-stopper.
Markings
Markings are provided for four aircraft:
- TBD-1, BuNo 0200, 2-T-1, VT-2, USS Lexington, 1939 (Yellow
Wing)
- TBD-1, BuNo 0324, 6-T-3, VT-6, USS Enterprise, 1939 (Yellow
Wing)
- TBD-1, BuNo 0338, VT-8, USS Hornet, 1941
- TBD-1, BuNo 0308, VT-6, USS Enterprise, 1942
Conclusion
So how many of you have one of these stashed away forgotten in
your collections? With the variety of new kits coming on the market
with varying levels of detail, don't forget this gem that is very
detailed and still very affordable.
Definitely recommended!
Return to the Aircraft Menu |