AMT/ERTL 1/48 A-20G Havoc Kit First Look
|Date of Review||November 2017||Manufacturer||AMT/ERTL|
|Kit Number||8894||Primary Media||Styrene|
|Pros||Unique subject||Cons||See text|
|Skill Level||Basic||MSRP (USD)||See text|
In the late 1930s, Douglas Aircraft Company developed a light bomber design for the US Army Air Corps designated Model 7. Powered by a pair of 450 horsepower engines, the Model 7 was underpowered and didn't generate any interest. When the design team swapped out the engines for a pair of 1100hp radials, the aircraft generated interest from the French, British Commonwealth, and Belgian air forces. When France fell to German forces, the bulk of the French aircraft were instead delivered to the UK as the Boston. Once the US Army Air Corps observed the significant improvement in performance with the larger engines, they also ordered the Model 7 into production as the A-20 light bomber, the P-70 night fighter, and the F-3 reconnaissance aircraft. A significant number of the A-20 production aircraft were delivered under lend-lease to the Soviet Air Force.
AMT/ERTL developed the first injection-molded kit of the A-20 Havoc in 1/48 scale back in the early 1990s. They released the A-20B/C, A-20G, A-20J and P-70 variants which have since been reissued by Italeri and even appeared in a Revell AG box at one point. This kit is the A-20G gun-nosed Havoc and is molded in light gray styrene and presented on eight parts trees plus left and right fuselage halves, and one tree of clear parts. The kit is a simple build yet offers some nice details as well. What is a bit surprising is even though this kit was designed in the 1990s, it features nicely (not overdone) scribed panel lines and it was well before the birth of the mad riveter.
Among the features on options in this kit:
- Nicely detailed cockpit
- Positionable cockpit overhead hatch
- Main spar that runs through the bomb bay and into the wings to provide solid mount and reliable wing-fuselage dihedral
- Instructions show 10 grams of ballast required in the nose
- Insert into bomb bay depicting four-bomb load
- Bomb bay doors are molded closed but kit provides cut line to position doors open
- Landing gear is positionable
- Landing gear doors are molded closed, but kit provides cut line to position doors open
- Weighted wheels
- Simple engine detail though not much is visible through the (correctly) tight cowl openings
- Optional ventral fuel cell over bomb bay doors
- Choice of .50 cal or 20mm gun barrels for nose
Decals are provided for two examples:
- A-20G, 43-21475, 389 BS/312 BG/5 AF, 'Little Joe'
- A-20G, 43-9476, 89 BS/3 BG/5 AF, 'Little Isadore'
So obviously this AMT/ERTL kit is long out of production, but Italeri has issued this kit and others in this series periodically. This is the nicest injection-molded kit of this aircraft to date in any scale, but the award for best A-20 kit in any scale goes to the Koster Aero Enterprises 1/48 kit which is vacuformed with resin, white metal, and photo-etched parts. You can find builds of the Koster kit online and see how impressive it builds up in experienced hands.
While I'm not a big fan of vacuformed kits, I do have this Koster kit for other reasons. The Koster kit provides interior details molded separately which can be used (with some work) inside the AMT kit. Ditto for the wheels wells. The bomb bay is an open cavity in the AMT kit with the exception of the main spar and bomb insert, while the Koster kit doesn't provide an option for open bomb bay. If I want my bomb bay open, I'll have to do it the old fashioned way - scratchbuilding. Otherwise, the Koster kit can be used for a super aftermarket set for building the AMT kit.
This is one of my projects I've been collecting for and I've also acquired the Vector A-20G/J cockpit and A-20J bombardier sets. Now I just need to find my A-20J kit...